■Use 

CFH type anti arc clip is a new type of structure of products, its main installation on the load side of the line insulator, preventing 10-20kv overhead conductors at break function. Convenient installation, reliable performance, provides a less investment for electric power department has achieved the effective measures of spin. According to user needs with peeling of the piercing type arc clip model for prevention: CFH - 50/240 B; Piercing type arc clip model for prevention: a CFH-500/240.

■Specifications and performance parameters

■Structural characteristics of

1, mainly by the insulation shield, gland nut, piercing press block, wire clip, arc rod and insulating casing and other groups.

2, arc hazel and clamp assembly connection as a body, take a blow when it happens, arc rod and insulator (or cross arm) between the discharge of the metal, make the stream power frequency arc moved to the arc burning on the rod. Thus protecting insulated wires from damage.

3, CFH - 50/240 of the piercing type arc clip has a puncture of tooth structure, easy installation and continuous work, without stripping the insulation wire insulation. Avoid wire core into the water and corrosion, reduce the labor intensity of operators.

4, tolerated about five big power frequency current arc burning.

■Discharge gap installation dimension table

■Pillar type arrester device The piercing type (一)

■Pillar type arrester device (二)

■Two types of surge arrester device installation schematic diagram:

The whole area is very concise, reduce the fault point, no bare spots