Chinese information:

GUY WIRE FITTINGS

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable.

The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.

According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.

There are two types of tension cable clips: wedge type and crimp type.

The technical requirements of the wire-pulling fittings shall implement the relevant national standards and special standards.

Material: The body and wedges of the clip are malleable cast iron, hot-dip galvanized. The closing pin is stainless steel, and the rest are hot-dip galvanized steel.

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable. The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.
According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.
There are two types of tension cable clips: wedge type and crimp type.
The technical requirements of the wire-pulling fittings shall implement the relevant national standards and special standards.
Material: The body and wedges of the clip are malleable cast iron, hot-dip galvanized. The rest are hot-dip galvanized steel parts.

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable. The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.
According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.
There are two types of tension cable clips: wedge type and crimp type.
The technical requirements of the wire-pulling fittings shall implement the relevant national standards and special standards.
Material: The closing pin is stainless steel, and the rest are hot-dip galvanized steel.

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable. The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.
According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.
There are two types of tension cable clips: wedge type and crimp type.
The technical requirements of the wire-pulling fittings shall implement the relevant national standards and special standards.
Material: The body is malleable cast iron, the rest are steel parts, hot-dip galvanized

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable. The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.
According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.
There are two types of tension cable clips: wedge type and crimp type.
The technical requirements of the wire-pulling fittings shall implement the relevant national standards and standards.
Material: Hot-dip galvanized steel.

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable. The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.
According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.
There are two types of tension cable clips: wedge type and crimp type.
The technical requirements of the wire-pulling fittings shall implement the relevant national standards and standards.
Material: Hot-dip galvanized steel.

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable. The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.
According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.
There are two types of tension cable clips: wedge type and crimp type.
The technical requirements of the wire-pulling fittings shall implement the relevant national standards and special standards.
Material: Steel parts, hot-dip galvanized. If anti-theft is required, an anti-theft device can be purchased separately.

The cable fittings are mainly used to fix the cable tower, including the parts leading from the top of the tower to the ground cable. The safe operation of the cable tower is mainly guaranteed by the cable and its cable hardware.
According to the conditions of use, the cable fittings can be divided into three categories: tightening, adjusting and connecting, with a total of twelve series.
There are two types of tension cable clips: wedge type and crimp type.
The technical requirements of the wire-pulling fittings shall implement the relevant national standards and special standards.
Material: Hot-dip galvanized steel.